ESP32-S3TFT 1.8"π· OV2640ESP32-S3 Dev Boardβ‘ Web Serial Ready
ESP32-S3 Camera with 1.8 inc TFT Display
XiaoZhi AI is an open-source firmware that turns an ESP32 into a powerful cloud-connected AI voice assistant with real-time speech recognition, natural language understanding, and...
Source: OceanLabz Lab Archiveβ’Target Microcontroller: ESP32-S3β’Display: TFT 1.8"
One-Click Web Serial Installer
Manifest: manifest-esp32s3-cam-xiaozhi-ov2640.jsonFlash Firmware Directly from Browser
Connect your ESP32-S3 Camera with 1.8 inc TFT Display board to your computer using a USB data cable. Click the button below to pair with your serial port and flash the official AI Xiaozhi firmware in seconds.
β οΈ Your browser does not support Web Serial. Please open this page in Google Chrome, Microsoft Edge, or Opera on desktop to flash firmware directly.
Requires USB Data CableCP2102 / CH340 Driver (if needed)Zero IDE Installation Needed
Hardware Checklist
- βMicrocontroller: ESP32-S3 Development Board
- βDisplay: TFT 1.8" Module (I2C / SPI)
- βMicrophone: INMP441 Omnidirectional I2S Mic
- βAudio Output: MAX98357A I2S DAC Amplifier + Speaker
- βCamera Module: OV2640 Sensor
- βConnection: USB Type-C Data Cable (for power & flashing)
Video Walkthrough
YouTubeWatch step-by-step assembly, pairing with the Xiaozhi platform, and live voice interactions.
Step-by-Step Hardware & Setup Guide
Follow the wiring connections, component details, Wi-Fi pairing instructions, and voice commands below.
What is XiaoZhi AI
XiaoZhi AI is an open-source firmware that turns an ESP32 into a powerful cloud-connected AI voice assistant with real-time speech recognition, natural language understanding, and text-to-speech using the xiaozhi.me platform.
Required Components
| Component | Description | Qty |
|---|---|---|
| ESP32 S3 Camera Board | AI Camera Dev Board | 1 |
| INMP441 I2S Mic | Digital I2S microphone | 1 |
| MAX98357A Amp | I2S audio amplifier | 1 |
| 2W 4Ξ© Speaker | Any available speaker up to 16Ξ©. | 1 |
| 1.8 TFT Display (SPI) 128x160 | Shows pairing code, images, animations | 1 |
| Breadboard & Wires | For prototyping | As required |
β οΈ Recommended: Use a zero/DOT PCB and solder all wires properly instead of a breadboard. Breadboard connections can become loose and unstable during movement, which may cause disconnections or errors.
Circuit Connections
π€ INMP441 Mic
VDD β 3.3V
GND β GND
L/R β GND
SD β GPIO42
WS β GPIO1
SCK β GPIO2
GND β GND
L/R β GND
SD β GPIO42
WS β GPIO1
SCK β GPIO2
π MAX98357A Amp
VIN β 5V
GND β GND
LRC β GPIO41
DIN β GPIO39
GAIN β GND
BCLK β GPIO40
GND β GND
LRC β GPIO41
DIN β GPIO39
GAIN β GND
BCLK β GPIO40
πΊ TFT Display
VCC β 5V
GND β GND
BL β GPIO38
CLK β GPIO19
DIN β GPIO20
D/C β GPIO47
CS β GPIO45
RST β GPIO21
GND β GND
BL β GPIO38
CLK β GPIO19
DIN β GPIO20
D/C β GPIO47
CS β GPIO45
RST β GPIO21
β οΈ Double-check all connections before powering on!

Flash Firmware (Browser-Based)
No Arduino IDE required β flash directly from your browser using Web Serial.
- Click "CONNECT" below
- Hold BOOT button on ESP32 S3 and connect USB
- Select the ESP32 S3 port and click Connect
- Choose "Install OceanLabz ESP32S3 TFT CAM" and click Install
- Wait 2 minutes for completion

ESP32S3 OV2640 CAM
ESP32S3 OV3660 CAM
Wi-Fi Configuration
After flashing, the ESP32 creates a hotspot named Xiaozhi-XXXX.
- Connect to this Wi-Fi (no password)
- Open
192.168.4.1in browser - Select your home 2.4GHz Wi-Fi and enter password
- Device will restart and connect to your network
β οΈ ESP32 only supports 2.4GHz networks. Use a data-capable USB cable.

Create Account & Pair
1
Reconnect to your home Wi-Fi (exit the XiaoZhi hotspot).
2
Open xiaozhi.me and click on "Console".
3
Create a free account using Google Sign-Up (fastest method).

Pair Your ESP32 S3
1
Click "+ Add Device" in the console dashboard.
2
Read the 6-digit code scrolling on the TFT display.
3
Enter the code and click Confirm to link your device.
4
Accept the agreement and click "Start Using", then select Open Source (Free).
β οΈ The code refreshes quickly β enter it as soon as it appears.

Device Paired Successfully!
Your ESP32 S3 is now connected and visible in the console dashboard.
Most Powerful Features & Voice Commands
π· Capture image using ESP32-CAM
π§ Send image to AI for analysis
π Set volume to 50%
βοΈ Increase brightness
π§οΈ Check weather status
π΅ Play music
π Tell me a joke
π Get instant AI response
π€ Press BOOT to activate
Auto-sleep after silence β press BOOT again to wake.