ESP32Intermediate~75 min
ESP32 Weather Station with DS18B20 & Web UI
A waterproof-probe weather station that logs readings and serves a clean web UI.
Everything you need
Required Components
| Component | Qty | Price |
|---|---|---|
| ESP32 WROOM-32 Development Board CP2102 USB Driver 2.4GHz Dual Core WiFi + Bluetooth (30 PINS) | ×1 | ₹449 |
| Jumper Wires 40pcs Male-to-Male (20cm) | ×1 | ₹59 |
Total: ₹508
#Introduction
Measure outdoor temperature with a waterproof DS18B20 and view it anywhere in your house.
#Wiring
- DS18B20 red → 3V3, black → GND, yellow → GPIO 5 (4.7k pull-up between yellow and 3V3)
#Steps
- Install OneWire + DallasTemperature.
- Flash, open serial for IP, browse to it.
#Troubleshooting
- −127 °C reading → missing pull-up resistor or reversed probe wires.